Fire Magic 1D-S0 Bar Caddy - Manual

1 L-C2-164 REV 4 - 1405290830
12"
HEIGHT
15"
WIDTH
23 3/4”
DEPTH
BAR CADDY
INSTALLATION INSTRUCTIONS
Robert H. Peterson Co. • 14724 East Proctor Avenue, • City of Industry, CA 91746
INSTALLATION OPENING:
Front to Back Depth 22-3/4 "
Width 14-1/4", Height 12"
SLIDE-IN MODEL #1D-S0
Shown with cover in place and
optional trim kit (part #3807)
1. 1D-S-05 Drawer (1)
2. 1D-S-09 Splash pan 21"x 13"x 6" (1)
3. 1D-S-06 Cover (1)
4. 1D-S-03 Condiment/bottle holder (with cap) (2)
5. 1D-S-08 Condiment/bottle holder cap (2)
6. 1D-S-04 Insulation (not shown) (5)
BEFORE INSTALLATION, CHECK
THAT YOU HAVE ALL OF THE
PARTS AS LISTED TO THE RIGHT.
Before installation, ensure the opening dimensions
are correct (Fig. 1). Then simply slide the bar caddy
assembly into place in the cut-out area. Place the 5
pieces of insulation inside the caddy, on the bottom
and against the sides. Place the splash pan inside
the caddy, and put the caddy top and cover in place.
Insert the holder pans and their pan lids.
It is now ready for use.
TO USE AS A FOOD WARMER, SEE REVERSE.
Fig. 1.
Cut out dimensions for bar caddy
NOTICE TO INSTALLER: Please leave these instructions with the consumer.
NOTICE TO CONSUMER: Please retain for future reference.
Improper installation, adjustment, alteration, service
or maintenance can cause injury or property damage.
Refer to this manual. For assistance or additional
information consult a qualifi ed, professional installer
or service agency.
WARNING
14 1/4"
width
12"
height
22 3/4"
depth