FiberPlex SAC1 - Manual (Page 9)

Dual Rack Mount Configuration
Half of the parts necessary to mount (2) SAC‐1‐AC in a 1U rack space are included in each SAC‐1‐AC package.
Together, all parts needed are supplied
1. Attach the Small Rack Mount Ear (118451C) to the right side of (1) SAC‐1‐AC using (4) Flat Head
Machine Screws as shown, (2) screws on top and (2) on the bottom.
2. Attach another Small Rack Mount Ear (118451C) to the left side of the otherSAC‐1‐AC using (4) Flat
Head Machine Screws as shown, (2) screws on top and (2) on the bottom.
3. Attach the Binding Plate (118473) to the right SAC‐1‐AC using (4) Flat Head Machine Screws as
shown, (2) screws on top and (2) on the bottom.
4. Push the (2) SAC‐1‐AC together and install the (4) Flat Head Machine Screws in the remaining holes
on the Binding Plate as shown, (2) screws on top and (2) on the bottom.
5. Mount the complete assembly into a standard 19” rack using customer supplied rack screws