FiberPlex VIM-MY32 - Manual (Page 12)

12
Fiber Options
Tactical grade military fiber ‐ (TAC‐4) is used for live production applications (P/N TFC‐0000‐04). Weighing 8.4
lbs.(12.6kg) for(300)feet, this cable contains (4) fibers and therefore it is capable of carrying the signals of (2)
systems on a single cable. The TAC‐4 connectors are hermaphroditic and can be connected to one another.
Multimode fiber can transport signals up to 2km (1.25 miles).
Neutrik OpticalCon® Fiber – this fiber cable contains (2) fibers and is also a tactical grade fiber (P/N TFC‐0000‐
02OC).
PVC fiber – PVC duplex fiber contains (2) fibers. Plenum rated fiber is also available. The installer can
terminate the fiber themselves, or Fiberplex can supply it pre‐terminated. This fiber is also available with a
strain relief and “pulling eye” which reduces on site labor.
ADDITIONAL OPTIONS
MD3 – A pair of LightViper MD3 units may be used to transport RS‐422, MIDI or RS‐232 from FOH to stage via the
RJ45 connector on the VIM‐MY32S card.
DMX4 – A pair of DMX4 enables the user to send (4) universes of DMX lighting control data, or
(3) universes and Yamaha control. The Yamaha control is connected via the DB9 connector on the
DMX4.
DGL‐422 – This interconnect cable contains active electronics and allows the user to transport Yamaha control from
the Yamaha console to the stage unit via the RJ45 connector on the VIM‐MY32S card.
Neutrik OpticalCon
Fiber Cable & Panel
Mount Connector
Plenum Install Fiber
TAC-4
DGL-422
MD3 – FRONT & BACK
DMX4i & DMX4o