Fenix KD-E User Manual
Page 3
4. Safety instructions for installation
The electric device must only be connected to the 230V AC 50Hz mains; the connection in the
bathroom must conform to ČSN standards.
The electric heating element must not be installed from the top part of the radiator.
Install the radiator in such a way that the heating element is always at the bottom, in a
vertical position.
Always disconnect the radiator from the mains during maintenance, cleaning and if it isn´t in
use.
The electric radiator is produced only for the purpose of heating or drying (to finish the
drying) of textiles.
The electric radiator must not be taken apart, emptied or adapted in any way.
Connection of the product to the mains must comply with general safety requirements as well
as technical standards for the connection of electric appliances. The installed plug has a
lower rating than the product; its removal doesn´t void the warranty.
If you need any assistance, do not hesitate to seek the help of our specialists (tel.
602 745 290).