Feelworld FW100AHT - Manual (Page 9)

8
2. Operation Instruction
● OSD Operation Instruction
Before OSD menu setting, please carefully check all connects correct
signal and power. Then the monitor in standby state(red power indicator light).
Press “ ”button on the unit, if in working state, repress “ ”button, the unit
will recover in standby state. In working state, press “
MODE”button to switch
VGA、HDMI、DVI、YPbPr、VIDEO & PC signals. In PC state, If not enter into
menu state, press “ ”button to adjust the prase, press “ ”button to change
the brightness of 5 levels. Press “ ”button on the unit enter into OSD
menu operation. Press “ ”or“ ”button to select the needed options. ：
（color） （adjustment） （menu） （function） （sound），after select
options, press “ ”or“ ”on the unit or remote controller to confirm, then
press “ ”or“ ”to adjust. If you want to exit OSD menu, repress
“ ”button.
In working state enter into OSD menu, picture as below:
PC Mode：
AV；HDMI；YPbPr；DVI Mode：