Feelworld DP101T User Manual
Page 5
5
3. Driver disk installation
a. System Requirements:
● CPU: Intel Pentium/Celeron/AMD/K6/Athlon/Duron 1.2GHz or above
● RAM: 512MB RAM or above
● USB: at least one or more USB2.0 port
● HDD: 30MB HDD space above
b. Installing monitor driver:
b-1.Insert the CD into the CD-ROM drive
● Please make sure that your USB monitor is connected to the PC
● Do not power off or disconnect the USB cable until installation is
completely finished. This may damage systems or may cause system errors.
b-2. Open the folder
b-3. Double click the icon
Pop-up as follows: