Faronics Power Save - Manual (Page 22)

Faronics Power Save User Guide
22
|
Installing Power Save
Installing or Upgrading Power Save on a Workstation via Core
Console
Power Save can be deployed by Installing or Upgrading Power Save via the Core Console.
The Core Agent, which is part of Faronics Core, must be installed on each workstation that will be
managed by Power Save. For more information on installing the Workstation Agent Installer,
refer to the Faronics Core user guide. The latest user guide is available at
http://www.faronics.com/library .
Once the Core Agent is installed, the workstations are detected on the network and visible in Core
Console. You can now Install or Upgrade Power Save on the workstations.
To install or upgrade Power Save, select a single workstation or multiple workstations, click
Configure Workstations in the right pane and select Advanced > Install/Upgrade Power Save
Client.
The workstation reboots after a successful install. Power Save will give you an
option to Suppress Reboot. If you Suppress Reboot, Power Save will not work
until the workstation reboots.
If there is more than one Loadin installed, the right-click contextual menu for
Power Save can be accessed by right-clicking a workstation, selecting Power Save
and then selecting the particular action.