Faronics Anti-Executable Enterprise/Server - Manual (Page 62)

Anti-Executable Enterprise User Guide
62
|
Command Line Control
Command Line Control
Anti-Executable Command Line Control offers network administrators increased flexibility in
managing Anti-Executable workstations by allowing for control of Anti-Executable via third-party
management tools and/or central management solutions. The following commands are available:
Use the /PW= switch to execute the command on computers where
a password has been set. Specify the password for the Administrator or the
Trusted User as applicable.
The switch in [ ] is optional.
Function Command
Display
Protection
Status
[path]AEC status [/pw=]
Enable
Anti-Executable
[path]AEC Protect On [/pw=]
Disable
Anit-Executable
[path]AEC Protect Off [/force] [/pw=]
The switch /force must be used if Anti-Executable is in Maintenance Mode.
Anti-Executable
version
[path]AEC version /PW=
Note that Command Line Interface does not display the License Key (if it
exists), while the User Interface does.
Enable
Maintenance
Mode
[path]AEC Maintenance [/duration=] [/lock]
/PW=
Using the command without any switch enables Maintenance Mode. Using
the switch /duration= enables Maintenance Mode for n minutes.
The /lock switch disables the keyboard and mouse. The switch /lock
must be used with the switch /duration=.
Change
Anti-Executable
password
[path]AEC changePassword
/NEWPW= [/pw=]
Changing a password, if one exists, requires the old password.
Add a folder or
file to local
control list as
Allow
[path]AEC allow
[/pw=]