Faronics Anti-Executable Dashboard - Manual (Page 11)

Installing the Anti-Executable Dashboard
|
11
Anti-Executable Dashboard
Installing the Anti-Executable Dashboard
Complete the following steps to install the Anti-Executable Dashboard.
Install pre-requisite Faronics software
1. Install Faronics Core (Faronics Core Server and Faronics Core Console). For more
information, refer to the Faronics Core Server User Guide at www.faronics.com/library .
2. Deploy the Faronics Core Agent to the workstations.
3. Install the Anti-Executable Loadin on the Faronics Core Server. For more information, refer to
the Anti-Executable User Guide at www.faronics.com/library .
4. Deploy the Anti-Executable Client to the workstations that are to be managed by
Anti-Executable.
Anti-Executable is now set up on the workstations.
Configure Anti-Executable
1. Select one or more Managed Workstations in Faronics Core.
2. Right-click and go to Anti-Executable > Configure Anti-Executable Client.
3. Click Enable.
4. Click Apply. Click OK.
Anti-Executable is now configured to prevent unauthorized executables on the workstations from
launching.
Install IIS Server
Complete the following steps to configure IIS Server:
1. Go to Start > Control Panel > Programs.
2. Click Turn Windows Features on or off.
3. Enable the following features:
• Web Server
— Common HTTP Features
— Static Content
— Default Document
Installation of Anti-Executable Dashboard with Windows Home Basic is not
supported.