EXCALIBUR FN102 Wind Blaster Portable - Manual (Page 2)

Congratulations on your purchase of the Wind
Blaster Portable by Excalibur Electronics, Inc! It’s ideal
for a hot summer day or for just when you need a cool
breeze.
Your Wind Blaster Portable is easy to use, but be sure
to use it safely. Before using, read this manual thoroughly.
Installing Batteries
Your Wind Blaster Portable requires four AA
batteries, not included. You’ll find the battery
compartment on the unit’s base. Lift off the battery
compartment lid. Install four AA batteries, making sure
to match the polarity (+ and -) with the diagram inside
the battery compartment. Place the tabs of the battery
compartment in their slots and snap the compartment
door back on.
How to Use
Using your Wind Blaster Portable is as easy as 1-2-3!
It has three speeds. Increase the speed by moving the
switch to the right. Decrease the speed by moving the
switch to the left. When the switch is all the way to the
left, this will turn off your Wind Blaster Portable.
Your Wind Blaster Portable also pivots at the neck so
you can direct the airflow exactly where you want. You
can also rotate the fan’s head front to back.
Special Care & Handling
• Avoid rough handling such as bumping or dropping
• Avoid moisture and extreme temperatures. For best
results, use between the temperatures of 39˚ F and
100˚ F (4˚ C and 38˚ C).
• Clean using only a slightly damp cloth. Do not use
cleaners with chemical agents.
Battery Information
• Your Wind Blaster Portable uses four AA batteries, not
included.
• Do not mix alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium) batteries.
• Do not mix old and new batteries.
• Do not use rechargeable batteries.
• Remove exhausted batteries from the unit.
Excalibur Electronics, Inc.
13755 SW 119th Avenue
Miami, FL 33186
T: 305.477.8080
F: 305.477.9516
Play games live at:
www.ExcaliburElectronics.com
FN102 (MA) Wind Blaster Portable 031506 V1