Daewoo Sky digibox - Manual (Page 34)

30 Using your Sky digibox
These System Setup options let you set the following:
◆ Picture Settings – to see and change the Sky digibox picture
format, second location picture format if using a tvLINK or
similar device, video output type, contrast level, timeout for the
Search & Scan banner and set Message Alert to ON or OFF.
(For further information about using Message Alert, refer to the
Message Alert section on page 31.) Select ‘Save New Settings’ to
confirm any changes or press back up to cancel.
◆ Sound Settings – to see and change the type of sound output
and standard volume level and to turn background music on or
off. You can also turn the ‘beep’ on or off. Select ‘Save New
Settings’ to confirm any changes or press back up to cancel.
◆ Language & Subtitles – to see and change the preferred
audio language, turn on the audio description and to turn
subtitles on or off, where available. Some programmes offer a
choice of language and/or subtitles. Select ‘Save New Settings’
to confirm any changes or press back up to cancel.
You can easily reset the settings for your Sky digibox to the standard
settings. Press the ‘Reset’ (red) key when viewing the Picture Settings,
Sound Settings and/or Language & Subtitles screens. Select ‘Save New
Settings’ to confirm any changes you make or press back up to
cancel.
◆ Add Channels – add Other Channels to your Sky Guide. This
feature is discussed in more detail on the following pages.
◆ System Details – to see details of your Sky digibox, including
your Sky digibox model number, manufacturer and your Sky
Viewing Card number.
◆ Signal Test – to test the quality of the signal your Sky digibox is
receiving from the satellite via your satellite dish.
◆ System Test – to check that your Sky digibox is properly
connected to your telephone line.
The System Details, Signal Test and System Test can be useful if you
ever have to call for technical help or repairs to your Sky digibox.