ETA Donny - Manual (Page 19)

You can wind the power cord A6 to the space in the lower part of the toaster. Store the
cooled down appliance at a safe and dry place, out of reach of children and incapacitated
people.
VI. TROUBLESHOOTING
Problem Cause Solution
The toaster does not Power supply not Check the power cord, plug and the
work/toast connected socket
The guide is not secured Push the guide down so that it is
in the lower position secured in the lower position. If the
toaster is not working, contact an
authorized service.
Bread is too light The selected level of Set a higher level of toasting
toasting was too low
Bread is too dark The selected level of Set a lower level of toasting
toasting was too high
Smoke is coming out The selected level of Set a lower level of toasting
of the toaster toasting was too high
There are too many empty the tray
breadcrumbs in the
breadcrumbs tray
VII. ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specified
on the product or in the accompanying documentation mean that the used electrical or
electronic products must not be disposed of together with municipal waste. For proper
disposal, hand them over at special collection places where they will be accepted free of
charge. Suitable disposal of the product can help to maintain valuable natural resources
and to prevent possible negative impacts on the environment and human health, which
could be the possible consequences of improper waste disposal. Ask for more details at
the local authority or at the local waste collection site. Fines can be imposed for improper
disposal of this type of waste in agreement with the national regulations.
If the appliance is to be put out of operation for good, after disconnecting it from power
supply we recommend cutting off the power cord and in this way it will not be possible to
use the appliance again.
More extensive maintenance or maintenance requiring intervention in the inner
parts of the appliance must be carried out by a professional service! Failure to
comply with the instructions of the manufacturer will lead to expiration of the right
to guarantee repair!
GB
19 / 50