beautypg.com

Aterial, Afety, Heet – ENVIROMAC MAC1 107.1020 User Manual

Page 7

background image

ENVIROFLEX®

M

ATERIAL

S

AFETY

D

ATA

S

HEET

I. PRODUCT IDENTIFICATION

Trade Name: Envirocoat

Chemical Name: Amorphous siliceous mineral-silicate Formula: Sodium-potassium-aluminum-silicate of

variable composition

II. PRODUCT INGREDIENTS

Ingredient Name: Perlite, Expanded milled may contain Crystalline Silica Quartz less than 1.0% %: 100
Permissible Exposure: 5mg/m

3

TWA Respirable dust re: OSHA PEL

III. PHYSICAL DATA

Appearance and Odor: White/off white powder; odorless Boiling Point: N/A Evaporation Rate: N/A Vapor Pressure: N/A
Specific Gravity (water=1): 2.35 Water Solubility (%): Slight Melting Point: N/A Vapor Density: (Aim1): N/A; %
% Volatile by Volume: N/A

IV. FIRE AND EXPLOSION DATA

Flash Point (Method): Nonflammable Unusual Fire or Explosion Hazards: None Flammable Limits: N/A

Extinguishing Media: N/A Special Fire-Fighting Procedures: None Auto-ignition Temperature: N/A

NFPA Flammable/Combustible Liquid Classification: N/A

V. HEALTH HAZARDS A. Summary/Risks

Summary: OSHA considers Perlite a nuisance dust and recommends a PEL of 5 mg/m

3

TWA respirable dust. Inhalation over long

periods of high amounts of any nuisance dust may overload lung clearance mechanism and make the lungs more vulnerable to

respiratory disease.

Medical Conditions Which May Be Aggravated: Pre-existing upper respiratory and lung disease (such as bronchitis, emphysema,
asthma, or others).

Target Organ(s): Lungs Primary Entry Route(s): Inhalation Acute Health Effect: Transitory upper respiratory irritant.

Chronic Health Effects: See Summary. Follow the safe handling practices shown on the product bag label.

V. HEALTH HAZARDS B. Signs/Symptoms of Overexposure

Inhalation: Coughing, irritation of nose and throat; congestion may occur upon overexposure Skin Absorption: N/A

Skin Contact: N/A Ingestion: Not hazardous. Generally regarded as safe by the FDA. Eyes: Temporary irritation and/or inflammation.

V. HEALTH HAZARDS C. First Aid/Emergency Procedures

Inhalation: Remove from dusty area; drink water to clear throat; blow nose to evacuate dust. Skin Contact: N/A

Skin Absorption: N/A Ingestion: Not hazardous, generally recognized as safe by the FDA Eyes: Do not rub eyes. Flush eyes with
copious amounts of water to remove any dust particles. Consult a physician if irritation persists.

Vl. REACTIVITY DATA

Stability: Material is stable. Hazardous polymerization will not occur. Chemical Incompatibilities: Hydrofluoric acid

Conditions to Avoid: None in designed use. Avoid contact with hydrofluoric acid. Hazardous Decomposition Products: Reacts with
Hydrofluoric acid to form toxic silicon tetra fluoride gas.

Vll. SPILL OR LEAK PROCEDURES

Procedures for Spill/Leak: Vacuum clean or wet sweep; avoid dusting; use a dust suppressant when sweeping.

Waste Management:

Not considered as hazardous waste by RCRA (40 CFR Part 261). Place waste and spillage in closed containers.

Dispose in approved landfill. RQ-N/A

VIII. SPECIAL PROTECTION INFORMATION

Goggles: Normally not required. You may use safety eyewear to protect from dusts. Gloves: Normally not required. You may use

gloves to protect overly sensitive skin. Respirator: Even though Perlite is a nuisance dust, we recommend the use of NIOSH approved

respirators to protect against silicosis producing dusts. Ventilation: Use adequate exhaust ventilation and/or dust collection to keep
dust levels below PEL.

Special Considerations for Repair/Maintenance of Contaminated Equipment: Insure proper respiratory protection.

IX. SPECIAL PRECAUTIONS

Storage Segregation Hazard Classes: N/A

***ALWAYS SEGREGATE MATERIALS BY MAJOR HAZARD CLASS***

Special Handling/Storage: Store in dry place. Repair all broken bags immediately. Avoid creating dust. Maintain good housekeeping

practice. Special Workplace Engineering Controls: Adequate ventilation and appropriate local exhaust where needed to keep dust

levels below PEL. Other: Comply with all Federal, State and local regulations.

As of the date of preparation of this document, the foregoing information is believed to be accurate and is provided in good

faith to comply with applicable Federal and State law(s). However, no warranty or representation with respect to such

information is intended or given.


In U.S.A.:

Enviroflex International Inc.

In Canada:

Enviroflex International Inc.

1051 Clinton St.

17 Brownridge Road, Unit #8

Buffalo, NY, U.S.A. 14206-2823

Halton Hills, Ontario, Canada L7G OC6

Phone :(716) 883-2319 Fax:(716) 892-2139

Phone:(905) 636-1177 Fax:(905) 636-1177


Effective:

November 14, 2008

Section 2A

Country:

Canada

Page 1 of 1