Entone Kamai 510 User Guide - Manual (Page 4)

Step 3: connecting to Network
Select only one Networking option, then proceed to Powering Up
Option #1 connect to a Wired Network via dSL, cable modem or Network
Router
connecting to Power Source
1. connect the power cord to the POWeR port on the back of the Kamai.
2. Plug the ac power adapter to a power outlet.
3. Follow the on-screen instructions.
NOTE: make sure your Tv is turned on and the
correct video input is selected.
cable not included
Option #2 connect to a Wireless Network via a Wireless Network Router
NOTE: Internal Wi-Fi is an optional feature of Kamai. Please contact your
service provider for the availability and detailed instructions on the wireless
network configuration.
Step 4: Powering Up
Setting Up Remote control
1. Open the battery cover by pressing down on the battery cover latch and
sliding it off.
2. Insert the batteries, matching the “+” and “-” marks on the batteries with
the interior of the remote control.
3. Snap the battery cover to close.
NOTE: Please refer to the Remote control Guide for details