Entone Hydra II Quick Start - Manual (Page 4)

Step 6
Select NO (typical) for “Enter” Button.
Step 7
On your TiVo remote, press the following keys in order: THUMBS UP > THUMBS DOWN > PAUSE > PLAY
* You should hear 5 rings when enter the key sequence above. If you do not hear the rings, enter the code
again.
Step 8
On the Channel Changing Tests screen, you should now see the phrase “Press ENTER for
advanced setup” at the bottom of the screen. Press the ENTER key on your remote.
Step 9
You will now see the Cable Channel Changing Advanced Setup screen. Highlight IR Code and
press SELECT.