Entone Amulet 500 - Manual (Page 6)

Quick
St
ar
t Guide
Quick
St
ar
t Guide
a
mule
t
m
edia
r
ec
order
a
mule
t m
edia
r
ec
order
9 8
amulet — rear Panel
Name Description
1 cable/aNt in* For connecting to a cable tV or antenna source.
2 tV out* For connecting to an rF tV for loop-through.
(For amulet 500 series, it should Not be connected to
in-house cable network)
3 composite Video For connecting to a standard-definition tV (SdtV).
4 audio Stereo audio output (left / right).
5 component
Video
For connecting to a high-definition tV (HdtV).
6 ir Blaster Port For connecting to an ir Blaster.
7 digital audio For connecting to an entertainment system that sup-
ports 5.1 Surround Sound audio.
8 Hdmi For connecting to a high-definition tV (HdtV).
9 ethernet For connecting to a wired network.
10 uSB to connect uSB devices such as uSB flash drive and
external uSB hard drive. (max 500ma load)
11 Power For connecting to a power source (100-240V, output
12V/3a).
* Features may vary depending on your service provider. contact your service
provider for more details.
7 4
6
1 2 5 3 8 9
10
11
SteP 1: coNNectiNG Video
amulet provides up to four video options for connecting
to your tV: Hdmi, component Video, composite Video and
coaxial. Select a video option then proceed to”connecting
audio” on page 13.
make sure your tV is turned on and the correct video input is
selected.
option 1: Hdmi (recommended)
if your tV has an Hdmi connection,
use an Hdmi cable (may not be in-
cluded) and connect amulet to the Hdmi iN port on your tV.
this connection provides both video and audio so you do not
need a separate audio connection. Proceed to
“connecting tV Source” on page 15.
delivers the best video & audio
quality via a single cable
S-Video
cable is optional and
may not be included