Entone Amulet 450 - Manual (Page 5)

Quick
St
ar
t Guide
Quick
St
ar
t Guide
a
mule
t
m
edia
r
ec
order
a
mule
t m
edia
r
ec
order
7 6
amulet — Front Panel
Name Description
1 Power Button Solid blue indicates the unit is on
Solid red indicates the unit is in standby mode
Flashing blue indicates the unit is starting up
Press button once to put unit in standby mode, press
again to resume
to restart the device, press and hold button for 5
seconds
2 reset (at bottom) reset the device factory settings with a thin metal
probe
3 link indicator Blue dot indicates that ethernet or Wi-Fi network con-
nection is active
4 clock clock displays current time set by your service pro-
vider.
5 Hd indicator Blue dot indicates current program is playing in Hd
(720p or higher) resolution
6 record indicator Blue dot indicates a tV program is currently recording
amulet — rear Panel
Name Description
1 tV out coaxial connection to tV for loop-through
2 caBle iN Port for connecting to cable or antenna source
or moca network
3 a/V out 9-Pin diN conector for connecting to video output us-
ing diN-to-rca cable
4 Hdmi digital video and audio port for connecting to a high-
definition tV (HdtV)
5 digital audio S/PdiF digital optical audio toSliNk output
6 ethernet Plug for wired network connection
7 uSB to connect uSB devices such as uSB flash drive and
external uSB hard drive.
(max 500ma load)-
8 Power dc power jack (12V/1.5a)
availability of certain features is dependent on your service provider. availability of certain features is dependent on your service provider.
7 4 6 1 2 5 3 3 4 1
2 5
6 8