EM Acoustics X3-DFSP self-powered downfill element - Manual (Page 30)

Page 30 of 36
X3-SP User Manual
v1.0 May 2012
Appendix B – Technical Specifications
X3-SP 3-way self-powered horizontal array element
ACOUSTICAL
ENCLOSURE TYPE: 3-way horn loaded, self-powered
FREQUENCY RESPONSE 1 : 55Hz – 20KHz +/- 3dB
DISPERSION 2 : 20° H x 40° V
DRIVE UNITS: 1 x 15” (381mm) neodymium LF cone drive unit
1 x 8” (203mm) neodymium MF drive unit
6 x 1” (25mm) exit neodymium HF compression drive unit
MAXIMUM SPL 3 : 138dB continuous, 144dB peak
MECHANICAL
DIMENSIONS (HxWxD): 1111 (43.7) x 574 (22.6) x 859 (33.8) mm/(ins)
NET/SHIPPING WEIGHT: 98 (215.6) / 102 (224.4) kg/(lbs)
ENCLOSURE: 15mm (5/8”) multi-laminate Birch plywood – rebated, screwed &
glued.
Finished in black semi-matt textured paint
RIGGING/SUSPENSION: Integral inter-element flying system
GRILLE: Foam-backed hex punched steel
AMPLIFIER PACKAGE
AMPLIFIER TYPE: Three channel Class-D
AMPLIFIER POWER: LF: 1550W RMS @ 8 ohm load
MF: 400W RMS @ 8 ohm load
HF: 400W RMS @ 8 ohm load
DSP SYSTEM: 96kHz sample rate, 120dB dynamic range
COOLING: low-speed 5VDC fan on heatsink – temperature controlled, only
required under extreme conditions
CONNECTORS: Female XLR input, male XLR link output (selectable as analog or
AES/EBU input)
Neutrik PowerCon TM input with loop output