EM Acoustics AQ-10 switchmode amplifier - Manual (Page 19)

AQ-10 Operating Instructions
Page 19
www.emacoustics.co.uk
Performance Of Your Amplifier: Specifications
Main Specifications
Parameter (Units) AQ-10
Output Power per channel [Crest Factor = 4.8] (Watts)
8 Ohms 1400
4 Ohms 2800
2 Ohms 3700
Output Power per channel bridged [Crest Factor = 4.8] (Watts)
8 Ohms 5300
4 Ohms 7400
THD+N, 4 Ohms (%)
@1kHz, 1dB below max output power < 0.08
@20Hz - 20kHz, 1dB below max output power < 0.15
Gain Options (dB) 26 / 32 / 36
Sensitivity Options for max power (dBu) 16.0 / 10.0 / 6.0
Sensitivity Options for max power (Volts) 4.9 / 2.5 / 1.5
Frequency Response, +0/0.5dB (Hz) 20 – 20000
Power Consumption, Nominal @ 240V, 4 Ohms (A) 7.0
Power Consumption, Nominal @ 120V, 4 Ohms (A) 14.0
Dimensions H x W x D (mm)
Amplifier 88 x 482 x 428
Boxed 230 x 580 x 560
Boxed Shipping – all except UK 250 x 610 x 600
Weight (kgs)
Amplifier 12.0
Boxed – shipping 14.0
Additional Specifications
Parameter (Units) AQ-10
Input Impedance – Active Balanced (Ohms) 20k
Input CMRR (dB) > 60
SNR (dB) 105
Damping Factor, 1kHz, 8 ohms > 400
Signal Limiters Present Yes
Protection Present – Short Circuit / DC Output / Temperature Yes
Mains In-rush Control Present Yes
Output Power per channel, 8 Ohms (Watts)
Sine Wave @ 1kHz 1150
Continuous music [Crest Factor of 2.8 or 9dB] 1300
Continuous music [Crest Factor of 4.8 or 14dB] 1400
Continuous music [Crest Factor of 7.8 or 18dB] 1480
Output Power per channel, 4 Ohms (Watts)
Sine Wave @ 1kHz 2250
Continuous music [Crest Factor of 2.8 or 9dB] 2600
Continuous music [Crest Factor of 4.8 or 14dB] 2800
Continuous music [Crest Factor of 7.8 or 18dB] 2900
Output Power per channel, 2 Ohms (Watts)
Sine Wave @ 1kHz 3200
Continuous music with Crest Factor of 2.8 [9dB] 3600
Continuous music with Crest Factor of 4.8 [14dB] 3700
Continuous music with Crest Factor of 7.8 [18dB] 3700
Due to continuing product improvement the above specifications are subject to change.