EM Acoustics EMS-121X fullrange passive loudspeaker User Manual
Page 10
10
EMS-121X User Manual
www.emacoustics.co.uk
Attachment of Omnimount
TM
or Powerdrive
TM
Installation Brackets
It is strongly suggested that you position your loudspeakers, then mark & drill the holes in the mounting walls
before you attach the bracket to the loudspeaker, as it is much easier to check positioning and fit of the holes
without the weight of the loudspeaker.
The EMS-121X is designed to work with OmniMount
TM
Series 60 or PowerDrive
TM
Series 100
products.
Lie the enclosure on its front and remove the four M6 countersunk points on the rear of the enclosure. Position
the loudspeaker-side of the bracket as required, reinstate the bolts and retighten. The bracket and EMS-121X can
now be mounted using the holes you have pre-drilled.