ELICA ELIBLOC HT - Manual (Page 8)

8
on the carbon filter corresponds to the Y reference on the
conveyor, then turn clockwise; for dismounting follow
instructions in reverse.
Replacing lamps
Disconnect the hood from the electricity.
Warning! Prior to touching the light bulbs ensure they are
cooled down.
Remove the anti-grease filter support grill or the anti-grease
filter to access the lamp area. Remove the damaged lightbulb
and replace with an incandescent oval bulb maximum 40W
E14.
In the case where model is provided with a halogen lightbulb,
replace with halogen bulb of 20W (GU5.3 - Ø50mm).
If the lights do not work, make sure that the lamps are fitted
properly into their housings before you call for technical
assistance.