ELICA ADAGIO - Manual (Page 12)

12
EN - Instruction on mounting and use
Closely follow the instructions set out in this manual. All
responsibility, for any eventual inconveniences, damages or
fires caused by not complying with the instructions in this
manual, is declined. The hood is conceived for the suction of
cooking fumes and steam and is destined only for domestic
use.
The hood can look different to that illustrated in the
drawings in this booklet. The instructions for use,
maintenance and installation, however, remain the same.
! It is important to conserve this booklet for consultation at
any moment. In the case of sale, cession or move, make
sure it is together with the product.
! Read the instructions carefully: there is important
information about installation, use and safety.
! Do not carry out electrical or mechanical variations on the
product or on the discharge conduits.
! Before proceeding with the installation of the appliance
verify that there are no damaged all components.
Otherwise contact your dealer and do not proceed with
the installation.
Note: the elements marked with the symbol “(*)” are optional
accessories supplied only with some models or elements to
purchase, not supplied.
Caution
WARNING! Do not connect the appliance to the mains until
the installation is fully complete.
Before any cleaning or maintenance operation, disconnect
hood from the mains by removing the plug or disconnecting
the mains electrical supply. Always wear work gloves for all
installation and maintenance operations. The appliance is not
intended for use by children or persons with impaired physical,
sensorial or mental faculties, or if lacking in experience or
knowledge, unless they are under supervision or have been
trained in the use of the appliance by a person responsible for
their safety. This appliance is designed to be operated by
adults, children should be monitored to ensure that they do
not play with the appliance. This appliance is designed to be
operated by adults. Children should not be allowed to tamper
with the controls or play with the appliance. Never use the
hood without effectively mounted grating! The hood must
NEVER be used as a support surface unless specifically
indicated. The premises where the appliance is installed must
be sufficiently ventilated, when the kitchen hood is used
together with other gas combustion devices or other fuels.
The ducting system for this appliance must not be connected
to any existing ventilation system which is being used for any
other purpose such as discharging exhaust fumes from
appliances burning gas or other fuels. The flaming of foods
beneath the hood itself is severely prohibited. The use of
exposed flames is detrimental to the filters and may cause a
fire risk, and must therefore be avoided in all circumstances.
Any frying must be done with care in order to make sure that
the oil does not overheat and ignite. Accessible parts of the
hood may became hot when used with cooking appliance.
With regards to the technical and safety measures to be
adopted for fume discharging it is important to closely follow
the regulations provided by the local authorities. The hood
must be regularly cleaned on both the inside and outside (AT
LEAST ONCE A MONTH). This must be completed in
accordance with the maintenance instructions provided in this
manual). Failure to follow the instructions provided in this user
guide regarding the cleaning of the hood and filters will lead to
the risk of fires. Do not use or leave the hood without the lamp
correctly mounted due to the possible risk of electric shocks.
We will not accept any responsibility for any faults, damage or
fires caused to the appliance as a result of the non-
observance of the instructions included in this manual. When
handling the hood do not put hands within the range of action
of the pull-out suction panel (trolley) The hood is equipped
with safety switches which inhibit operation when the front
filter panel is unhooked.
With the intention of constantly improving our products, we
reserve the right to make all the changes in their technical,
functional or design characteristics, deriving from their
evolution. In case of the version with external motor, the
normal operation of the hood requires the use of a suction unit
(external motor) of the same manufacturer. This appliance is
marked according to the European directive 2002/96/EC on
Waste Electrical and Electronic Equipment (WEEE). By
ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment
and human health, which could otherwise be caused by
inappropriate waste handling of this product.
The symbol on the product, or on the documents
accompanying the product, indicates that this appliance may
not be treated as household waste. Instead it should be taken
to the appropriate collection point for the recycling of electrical
and electronic equipment..
Disposal must be carried out in accordance with local
environmental regulations for waste disposal.
For further detailed information regarding the process,
collection and recycling of this product, please contact the
appropriate department of your local authorities or the local
department for household waste or the shop where you
purchased this product.
Appliance designed, tested and manufactured according to:
• Safety: EN/IEC 60335-1; EN/IEC 60335-2-31, EN/IEC
62233.
• Performance: EN/IEC 61591; ISO 5167-1; ISO 5167-3; ISO
5168; EN/IEC 60704-1; EN/IEC 60704-2-13; ISO 3741; EN
50564; IEC 62301.
• EMC: EN 55014-1; CISPR 14-1; EN 55014-2; CISPR 14-2;
EN/IEC 61000-3-2; EN/IEC 61000-3-3. Suggestions for a
correct use in order to reduce the environmental impact:
Switch ON the hood at minimum speed when you start
cooking and kept it running for few minutes after cooking is
finished. Increase the speed only in case of large amount of
smoke and vapour and use boost speed(s) only in extreme
situations. Replace the charcoal filter(s) when necessary to
maintain a good odour reduction efficiency. Clean the grease
filter(s) when necessary to maintain a good grease filter
efficiency. Use the maximum diameter of the ducting system
indicated in this manual to optimize efficiency and minimize
noise.
Additional Installation Specifications:
Use only the fixing screws supplied with the product for
installation or, if not supplied, purchase the correct screws
type. Use the correct length for the screws which are identified
in the Installation Guide. In case of doubt, consult an
authorised service assistance centre or similar qualified
person.