Directed Electronics OHD070 User Manual

Page 9

Text mode
Original mode

1. Determine the mounting location and drill four mounting holes (see the figure

above).

2. Attach the mounting bracket to the holes with the self-tapping screws (ø4x10).
3. Let the two levers aim at the slots on the DVD bracket to fix the display unit.
4. Open the monitor to display the five screw holes.
5. Attach the unit to the bracket with the mounting bolts (M 3.5x10).
6. Insert five rubber caps into the screw holes.
7. When the installation has completed, you can turn the display upward or down-

ward, left or right to adjust the viewing angle. (See the arrowhead symbol in
the figure above).

Slots

Rubber Caps

Mounting Bolts (M3.5x10)

DVD Bracket

Levers

Mounting Bracket

Self-tapping Screws (ø4x10)