Doro 345GSM - Manual (Page 25)

22
English
Tone.volume
Press Menu , scroll to and press OK .
Select User profiles and press OK .
Select a user profile and press Options .
Select Customize and press OK .
Select Volume and press OK .
Scroll up/down to change the ring volume, then press OK .
Set up the key tone volume in the same way.
Alert type (ring/vibrate)
Incoming calls can be signaled by a ring tone and/or vibration, or
by light only.
Press Menu , scroll to and press OK .
Select User profiles and press OK .
Select a user profile and press Options .
Select Customize and press OK .
Select Alert type and press OK .
Select the desired signaling mode and press OK .
Warning.and.error.tones
Warning and error tones are used to alert the user of low battery
power, phone and SIM card errors, etc.
Press Menu , scroll to and press OK .
Select User profiles and press OK .
Select a user profile and press Options .
Select Customize and press OK .
Select Extra tone and press OK .
Select a tone and press On / Off to enable/disable it.
Press Done to save.
1 .
2 .
3 .
4 .
5 .
6 .
7 .
1 .
2 .
3 .
4 .
5 .
6 .
1 .
2 .
3 .
4 .
5 .
6 .
7 .