Digi-Star StockWeigh 600 - Manual (Page 9)

Operators Manual
D3656-US 5
NOTE: If the indicator is not set for weigh method 4 or 8, “Lock-On
Weigh Method” the indicator will enter the “Short Form
Calibration” menu (see Appendix “A”).
' # $*
$ # +# , '-
Enter the Long Form Setup by holding [Net-Gross] and pushing [On/Off]
for three seconds.
Press [On/Off] to advance to the desired parameter.
Press [Net/Gross] to advance to the proper setting.
Press [On/Off] to save setting and advance to the next parameter.
Hold [Tare] and press [On/Off] to return to indicator operation.
+
Default settings for the indicator are as follows:
!"#$
% &'
%% (
! (
%%
) )
* +
These parameters can be selected, de-selected or adjusted to fit the
way you use the scale. See below for descriptions.
Zero Tracking
If “ON”, the scale will adjust for small weight
variances of up-to 5lbs in the Lock-On weigh
method. This allows the scale to compensate
for such things as mud or snow accumulation
on the scale platform.