Digi-Star John Deere 750/1560/1590- 20ft Drill - Manual (Page 5)

Scale Bracket and Load Cell Mounting Installation
D3858-US-Rev A John Deere 750/1560/1590-20 ft Grain Drill 3
5. Install the front and back middle load cells with the 2-1/4” clevis pins. The load cell’s arrow must be
pointed up (located on the end of the load cell). Two of the load cells are marked with short cords for
the center of the drill.
6. Next, install the rear middle bracket. Let the seed bin down to about 1”. Use the 2-1/2” x 3/8” clevis pin
to hold the weigh-bar in place. The pin should be in the middle of the 1/2” hole.
7. Install the front middle bracket. Install the 2-1/2 x 3/8 clevis pin the same as the rear bracket. Leave all
bolts loose.