Digi-Star ERM-2.4 - Manual (Page 8)

ERM-2.4 Operators Manual
8
INDICATOR SETUP INSTRUCTIONS
To utilize the External Radio feature:
1. Make sure the indicator has a J905 port installed.
a. If no J905 serial port is installed, the indicator must be sent in for
an upgrade.
NOTE: The ERM-2.4 is not compatible with J904 indicators.
2. Ensure that the software running on the scale Indicator is compatible
with the ERM-2.4.
a. To check the current software version
, press “ON” momentarily.
b. Continue to read
the display until it shows “PRGID”. Any version
that displays 8J or newer is compatible. (For example 8N would
be compatible).
3. To activate the External Radio feature, from the Indicator, set EXTRAD
in Menu 2 (D.A.N. 229) to "ON".
4. To set up the radio channel, refer to the
“Setting up the Indicator”
section of the Cab Control 2.4 manual.
NOTE: The ERM-2.4 is not compatible with legacy wireless Digi-Star
products.