Diamond Amplification Hammersmith User Manual
Page 9
HAMMERSMITH OWNER’S MANUAL
PAGE 5 OF 15
d. Middle 4.5
e. Bass 7
f. Presence 6
3. Take the amp off standby and try out Channel 1.
4. Now switch to Channel 2 and play away!
POWER/STANDBY
Always keep the Power switch off when unplugging and plugging in to your power source.
Once the amp is turned on (the jewel light will illuminate to indicate power is on), and when
you have made all the appropriate connections, take the amp off standby. Allow the amp to
warm up for several minutes before playing for optimal result.
You should always return the amp to standby before turning off to allow the amp to
“discharge” voltage. Doing this habitually will extend the life of your amp.
DIALING IN
EFFECTS LOOP
The Effects Loop is tube driven. It is wired in series and there is no need to turn it on or off.
The Return jack will activate when you put a cable in it. Hence, when you plug a cable in, it
turns on. When you unplug it, it’s off.