DFI SB630-CRM - Manual (Page 156)

156
6
Intel AMT Settings
31. In the TCP/IP Settings menu, select Wired LAN IPV4 Confi guration
then press Enter.
WIRED LAN IPV4 CONFIGURATION
DHCP Mode
Disabled
Enabled
32. Select Previous Menu until you return to the Intel(R) AMT Confi guration
menu. Select Activate Network Access then press Enter. Type Y then
press Enter.
INTEL (R) AMT CONFIGURATION
Manageability Feature Selection < Enabled>
> SOL/ IDER/ KVM
> User Consent
Password Policy
>
Network Setup
Activate Netwok Access
Unconfi gure Network Access
> Remote Setup And Confi guration
[
] = Move highlight [ENTER] = Select Entry [ESC]= Exit
Activiates the current network settings
and opens the ME netwotk interface
Continue: (Y/N)
= Complete Entry [ESC]= Discard Changes
Intel(R) Management Engine BIOS Extension v8.0.0.0061/Intel(R) ME v8.0.4.1441
Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.
Intel(R) Management Engine BIOS Extension v8.0.0.0061/Intel(R) ME v8.0.4.1441
Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.