DFI HD330-H81 - Manual (Page 17)

www.dfi .com
17
Chapter 2 Hardware Installation
Chapter 2
COM1/COM2 RS232/422/485 Select
JP2 (for COM 1) and JP11 (for COM 2) are used to configure the COM ports to RS232, RS422
(Full Duplex) or RS485. The pin functions of the COM ports will vary according to the jumper’s
setting.
JP2/JP11
JP11
RS232 RS422
Full Duplex
RS485
COM 1/ COM 2
DCD- TD RD DT
R-
GND
1 2 3 4 5
RT
S-
RI
-
DSR
-
CTS-
6 7 8 9
RXD+ TXD+ RXD- TXD- N.C.
1 2 3 4 5
6 7 8 9
N.C. N.C. N.C. N.C.
DA
TA
+
DA
TA
-
N.C. N.C. N.C. N.C.
6 7 8 9
1 2 3 4 5
N.C. N.C. N.C.
JP2
COM1/COM2 RS232/Power Select
1-3 (RI), 2-4 (DCD) On:
RS232 (default)
1 3 5
2 4 6
JP14 JP3
1-2 On: RS232
(default)
1
3
5
2
4
6
3-4 On: RS422
Full Duplex
1
3
5
2
4
6
5-6 On: RS485
1
3
5
2
4
6
3-5 (+5V), 4-6 (+12V) On:
RS232 with power
1 3 5
2 4 6
JP3 (for COM 1) and JP14 (for COM 2) are used to configure Serial COM ports to pure RS232
or RS232 with power. The pin functions of COM 1 and COM 2 will vary according to JP3’s and
JP14’s setting respectively.
COM 1
COM 2
COM 1
COM 2