DFI NP100-N16C - Manual (Page 46)

46
2
Hardware Installation
FDD (Floppy Disk Drive) Connector
1 1
The system board is equipped with a 26-pin FPC type FDD connector. Only con-
nect a 1.44MB slim-type floppy disk drive. Refer to the next page for the pin
function of this connector.
Connecting the FDD Cable
Insert one end of the FDD cable into the FDD connector and the other end of
the cable to the floppy drive. Pin 1 of the cable must align with pin 1 of the FDD
connector.
BIOS Setting
Enable or disable this function in the Integrated Peripherals submenu (“Super IO
Device” section) of the BIOS. Refer to chapter 3 for more information.
1 26