DFI Q7-951 - Manual (Page 16)

16
2
Hardware Installation
Power-on Select
JP2
3 1 3 1
2-3 On: Power-
on After G3
(default)
1-2 On: Power-on
via power button
To power-on after G3:
1. Set JP2 pins 2 and 3 to On.
2. Set the “After G3” field to Power Off/WOL.
3. Set the “GbE Wake Up From S5” to Enabled.
The BIOS fields are in the “South Bridge Configuration” submenu (Chipset menu)
of the AMI BIOS utility.
To power-on via AC Power:
1. Set JP2 pins 2 and 3 to On.
2. Set the “After G3” field to Power On.