DFI COM630-B - Manual (Page 10)

1
10
Introduction
I/O Connectors
Expansion Slots
COM Express
Connectors
Dimensions
• 2 connectors for 4 additional external USB 2.0/1.1 ports
• 1 connector for an external serial port
• 1 LVDS LCD panel connector
• 1 LCD/inverter power connector
• 1 Digital I/O connector
• 1 Digital I/O power connector
• 1 front audio connector for line-out and mic-in jacks
• 1 CD-in internal audio connector
• 1 S/PDIF-in/out connector
• 1 GPIO connector
• 1 connector for IrDA interface
• 4 Serial ATA connectors
• 1 40-pin IDE connector
• 1 FDD connector
• 1 parallel connector (optional)
• 1 24-pin ATX power connector
• 1 4-pin 12V power connector
• 1 Wake-On-Ring connector
• 1 chassis open connector
• 1 front panel connector
• 3 fan connectors
• 1 diagnostic LED (optional)
• 1 CompactFlash socket
• 1 PCI Express x16 (Graphics or Dual SDVO)
• 2 PCI Express x1
• 4 PCI slots (PCI 2.3, 32-bit, 33MHz)
• Two 220-pin COM Express standard connectors
• Module connector pin: Tyco 3-631849-6
• Dimensions
- ATX form factor
- 305mm (12”) x 244mm (9.6”)
• Compliance
- PICMG COM Express R1.0, Type 2