DFI QB700-B - Manual (Page 9)

1
9
Introduction
Processor
Chipset
System Memory
Expansion
Interfaces
Graphics
Audio
LAN
SD/SDIO/MMC
Serial ATA
BIOS
Energy Efficient
Design
Power
Chapter 1 - Introduction
• Intel ® Atom TM E680: QB700-B680
• Intel ® Atom TM E660: QB700-B660
• Intel ® Atom TM E640: QB700-B640
• Intel ® Atom TM E620: QB700-B620
• Intel ® EG20T PCH (Platform Controller Hub)
• Supports memory down (single 32-bit channel)
• Supports DDR2 800MHz
• Supports up to 1GB system memory (default: 512MB)
• Supports 6 USB ports (USB1.1/2.0 host controllers)
• Supports 1 USB Client Interface
• Supports LPC Interface
• Supports SMB and I
2 C interfaces
• Supports 3 PCIE x1 interfaces
• Supports CAN-bus (Controller-Area Network) interface
• Intel ® GMA 600
• Supports up to 400MHz graphics frequency
• Ultra low power integrated 3D graphics
• High definition hardware video decoder and encoder engine
• Supports LVDS and SDVO interfaces
- LVDS: Supports pixel clock depths of 18/24-bit, single
channel, max. pixel clock of 80MHz, equates to
1280x768 @ 60Hz
- SDVO: Up to 160MHz pixel clock, equates to 1280x1024
@ 85Hz
• Supports High Definition Audio interface
• Integrated Intel
® PCH GbE MAC
• One Micrel KSZ9021RNI Ethernet PHY
• Supports 10Mbps, 100Mbps and 1Gbps data transmission
• IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps) com-
pliant
• Supports 1 SD/SDIO/MMC
• Supports SDA Standard Ver 1.0, SD memory card speci
fication Ver 2.0, SDIO card specification Ver 1.0, MMC Sys-
tem specification Ver 4.1
• Conforms to Secure Digital Host Controller (SDHC) speed
class 6
• Supports two Serial ATA interfaces
• SATA speed up to 3Gb/s (SATA 2.0)
• 16Mbit SPI Flash BIOS (UEFI BIOS)
• Supports ACPI 2.0/1.1 specification
• Enhanced Intel
® SpeedStep Technology
• Input: VCC_RTC, 5V standby, 5V
Specifications