DFI HM961-HM86 - Manual (Page 43)

www.dfi .com Chapter 4 BIOS Setup
43
Chapter 4
WatchDog Configuration
This field is used to enable or disable the Watchdog timer function.
Enable/Disable IT8518
WatchDog Timer.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
WatchDog1 function
Advanced
[Disabled]
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save and Reset
ESC: Exit
Intel(R) Ethernet Network Connection i217-LM - 88:88:88:...
This section is used to configure the parameters of Gigabit Ethernet device.
Click to confi gure the
network device port.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
PORT CONFIGURATION MENU
 NIC Confi guration
Blink LEDs (range 0-15 seconds)
PORT CONFIGURATION INFORMATION
UEFI Driver:
Adapter PBA:
Chip Type:
PCI Device ID
PCI Bus: Device: Function:
Link Status
Factory MAC Address:
Advanced
0
Intel(R) 1GbE DEV 5.1.00
FFFFFF-OFF
Intel PCH LPT
153A
0:25:0
[Disconnected]
88:88:88:88:87:88
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save and Reset
ESC: Exit
Blink LEDs
Blink LEDs for the specified duration (up to 15 seconds).
Link Status
This field indicates the link status of the network device.