Chapter 3 – DFI CD905-B2600 User Manual
Page 24
www.dfi .com
Chapter 3 Hardware Installation
24
Chapter 3
Signal
Pin#
Pin Type
Pwr Rail /Tolerance
PU/PD
Description
USB0+
A46
USB0-
A45
USB1+
B46
USB1-
B45
USB2+
A43
USB2-
A42
USB3+
B43
USB3-
B42
USB4+
A40
USB4-
A39
USB5+
B40
USB5-
B39
USB6+
A37
USB6-
A36
USB7+
B37
USB7-
B36
USB_0_1_OC#
B44
I CMOS
3.3V Suspend/3.3V
PU 10k to 3.3VSB USB over-current sense, USB channels 0 and 1. A pull-up for this line
shall be present on the Module. An open drain driver from a USB
current monitor on the Carrier Board may drive this line low. Do not
pull this line high on the Carrier Board.
USB_2_3_OC#
A44
I CMOS
3.3V Suspend/3.3V
PU 10k to 3.3VSB USB over-current sense, USB channels 2 and 3. A pull-up for this line
shall be present on the Module. An open drain driver from a USB
current monitor on the Carrier Board may drive this line low. Do not
pull this line high on the Carrier Board.
USB_4_5_OC#
B38
I CMOS
3.3V Suspend/3.3V
PU 10k to 3.3VSB USB over-current sense, USB channels 4 and 5. A pull-up for this line
shall be present on the Module. An open drain driver from a USB
current monitor on the Carrier Board may drive this line low. Do not
pull this line high on the Carrier Board.
USB_6_7_OC#
A38
I CMOS
3.3V Suspend/3.3V
PU 10k to 3.3VSB USB over-current sense, USB channels 6 and 7. A pull-up for this line
shall be present on the Module. An open drain driver from a USB
current monitor on the Carrier Board may drive this line low. Do not
pull this line high on the Carrier Board.
I/O USB
3.3V Suspend/3.3V
USB differential pairs 7, USB7 may be configured as a USB client or as a host, or both, at the
Module designer's discretion.
I/O USB
3.3V Suspend/3.3V
USB differential pairs 5
I/O USB
3.3V Suspend/3.3V
USB differential pairs 6
I/O USB
3.3V Suspend/3.3V
USB differential pairs 3
I/O USB
3.3V Suspend/3.3V
USB differential pairs 4
I/O USB
3.3V Suspend/3.3V
USB differential pairs 1
I/O USB
3.3V Suspend/3.3V
USB differential pairs 2
USB Signals Descriptions
I/O USB
3.3V Suspend/3.3V
USB differential pairs 0