DFI EC700-BT Installation Guide - Manual (Page 2)

2
Installing a 2.5" SATA Drive
1. Locate the SATA drive bay on the system board. Unplug the SATA power and data cable, and
remove the 4 mounting screws that secure the drive bay to the system board.
2. Align the mounting holes of the SATA drive with the mounting holes on the HDD bracket and then
use the 3 provided mounting screws to secure the drive in place.
Mounting Screw
Mounting Screw
2.5" SATA drive
Mounting Screw
Mounting Screw
SATA drive bay
SATA power cable
SATA data cable