Devolo dLAN LiveCam - Manual (Page 26)

dLAN network 25
devolo dLAN LiveCam
Define and change the access password for
the dLAN LiveCam under Password. For
security reasons, we recommend al-
ways setting an individualised access
password. Confirm your entries with Add.
Tap on the password line so that a key-
board is displayed on the smartphone or
tablet. You can ensure upper-case letters
remain activated by tapping the arrow key
twice (shift lock).
Furthermore, the status LED can be
switched on or off. In darkness, the LED
lighting can be disruptive.
Tapping the camera with the arrow
stores the picture in the photo gallery so
that you can also easily send it by e-mail
(e. g. via Bluetooth, Skype, Google Mail).
Here, you determine the lighting options.
Select Indoor if the camera is recording in-
doors, select Outdoor if the camera is re-
cording outdoors. Select Improve
contrast if you would like to record in the
dark or outdoors in poor lighting condi-
tions. The infrared mode can be turned on
or off or set to automatic. Confirm your
entries with Apply.
Here, you reset the camera settings to the
factory defaults.
The dLAN password is not affected
by this.
Tapping this symbol turns the view of the
camera image horizontally or vertically. En-
able the Mirror image function for mirror-
ing the image depending on the positioning
of the camera (e.g. camera head pointing
downward).
Here, you can assign an individual name to
your camera. Confirm your entry with Ap-
ply.
Tapping the recycle bin deletes the con-
nected camera.