Directed Electronics Directed Video VC2050 - Manual (Page 14)

14
© 2001 Directed Electronics, Inc.
ON-SCREEN MENU
Your VCR has on-screen menus that allow you to
access and control the VCR’s programmable fea-
tures. You will use the buttons on the remote
control to work with the on-screen program-
ming. If the setup menu does not appear, make
sure the TV is tuned to the same channel as the
VCR output CH3/4 on the SETUP MENU of the
VCR. If the VCR is in the TV mode, press TV/VCR
on the remote control to set VCR to TV mode.
To make all of the VCR’s features available, set the
VCR functions before playing or recording a tape.
Setting the Main Menu
RECORD SPEED
The VCR can record at two tape speeds. The slower speed (SLP)
allows the VCR to record more program material on a tape. Tapes
recorded at standard speed (SP) provide a clearer picture. (See
page 12.)
AUTO REPEAT
Press ENTER to activate the AUTO REPEAT. Auto repeat sets the
VCR to play a tape repeatedly unless a tape control is activated
(stop, fast-forward, or rewind).