Daktronics Indoor Hockey Goal Lights - Manual (Page 11)

Mechanical Installation 5
Section 2: Mechanical Installation
Mechanical installation consists of determining the proper method of permanently mounting the goal
lights. Be sure that the installation complies with local building codes.
Note: Daktronics does not assume any liability for any installation derived from the information
provided in this manual or installations designed and installed by others.
2.1 Goal Light Mounting
Daktronics goal lights are typically mounted in one of two ways: elevated on a support
behind the goal, or clamped to the safety glass surrounding the rink.
Each goal light comes with hanging brackets and other hardware for mounting. The brackets
attach to the ends of the goal light base, and two sizes of clamps permit the unit to hang
behind the safety glass for protection, or from the wall surrounding the ice. Refer to the
“Protective Glass Mounting Method” on Drawing A-153913 in Appendix A.
Goal lights may also be attached to a 1" threaded pipe, which elevates the unit on a pole-type
support. Refer to the “1" Threaded Rod Mounting Method” on Drawing A-153913 in
Appendix A.