D.T. Systems SPT 2420 - Manual (Page 12)

INTENSITY LEVEL (CONT.)
Setting the Jump Level
1. Press and hold both the “JUMP” button and one of the
Intensity Level Buttons at the same time ("Intensity Up"
button for increase, "Intensity Down" button for decrease).
2. Release only the Intensity Level button when approxi-
mate desired Intensity Level is met. Keep the “JUMP” but-
ton depressed.
3. With the Jump button still depressed, you can now tap
the Up or Down Intensity Level button to fine tune the
level desired.
4. Like the Rise stimulation, the intensity level will return
to its original setting after the Jump feature has been used.
12
CAUTION
To avoid accidentally shocking your dog, please make sure that
the collar is NOT on the dog while setting the jump level. If the
two buttons are not pushed at the EXACT same time, you will
run the risk of emitting a shock.
Using the Rise Stimulation
The Rise function will gradually increase stimulation from
your current intensity level to the maximum intensity level
(level 50) while the “RISE” button is being pressed. The
intensity level will return to its original setting when the
button is released.