Dixon 114863 - DCK3 - Manual (Page 10)

10
ASSEMBLY
6. Place the hood assembly on to the hitch
assembly. Place both hood hinges between
the upper hitch mounts on the hitch assembly.
Be sure that the rubber seal is on the inside
of the hood. Place the (2) friction washers
between the hood hinge and the upper hitch
mount. Place (2)990563, 3/8 x 1 bolt thru the
hinge and mount. Secure with (2) 976979,
3/8 nyloc nut. Figure 3.
FIGURE 3
HOOD ASSEMBLY
HOOD HINGE
3/8 NYLOC NUT
3/8 X 1 BOLT
RUBBER SEAL
UPPER HITCH MOUNT
HITCH PIN
7. Open the hood and secure the (2) springs
to the bolts on the hood assembly and the
hitch assembly. Figure 3.
SPRING