DeLonghi Fan Heater - Manual (Page 4)

OPERATION AND USE
1) SETTING THE CLOCK
For the first time, set the clock to the correct time, proceeding as follows:
• Press the button “hour” until the display shows the hours for the correct time and AM or
PM, then release the button (fig.1).
• Press the button “min” until the display shows the minutes for the correct time, then
release the button (fig. 1).
When setting the correct time, the numbers will flash on the display.
The flashing of the numbers will continue for a few seconds after the adjustment has finished
then stop on the correct time and the clock start working.
(Keep both pushbuttons pressed for more than 3 seconds to move through the hours and
minutes in fast mode).
To change the time, press pushbuttons “hour” for at least 5 seconds, then proceed as
above to modify both hours and minutes.
2) MANUAL FUNCTIONING
To operate the heater without timer press the “ON MODE” button. (Fig. 1). By pressing the
“ON MODE” button one or more times, the appliance will select the operating heating
power, as follows:
O
AUTO AM
° F
current time room temperature
° F
MAN AM
Maximum power
° F
MAN AM
° F
MAN AM
° F
MAN AM
° F
MAN AM
O
Medium power
Minimum power
Fan only (summer ventilation)
Off
4
GB 10-05-2001 9:00 Pagina 4