Cybex 20060 Eagle NX Seated Leg Curl - Manual (Page 15)

Cybex Owner’s Manual
15
5. Remove front sheet, do not peel decals off of weight plates.
2
1
Description
1 Weight stack selector pin
2 Weight plate decal
6. Repeat above steps for other half of the weight plate decals.
Install cable
1. Route cable through slot in top cover, through pulley bracket, and down through guide rod
plate.
2. Install two BHSCS and two pulley shaft bolts securing lower pulley assembly to pulley
bracket using two 5/16” Allen wrenches.
2
3
4 1
Description
1 Pulley shaft bolt
2 BHSCS
3 Lower pulley assembly
4 Pulley bracket
3. Install two BHSCS and two pulley shaft bolts securing top two pulley assemblies to pulley
bracket using two 5/16” Allen wrenches.
1
2
4
3
Description
1 Pulley shaft bolt (2)
2 BHSCS (2)
3 Top pulley assembly (2)
4 Pulley bracket