Directed Electronics 5303 - Manual (Page 8)

8 © 2008 Directed Electronics. All rights reserved.
�������
and
�������
Buttons
The numeric display toggles between the time of the day and the alarm clock when these buttons are pressed
simultaneously.
�������
and Buttons
Press these buttons simultaneously to activate the parking timer. Each additional press will toggle through the
available options (10 min., 20 min., 30 min., 1 hour, 1.5 hours, 2 hours, and off).
�������
and
�������
Buttons
When pressed simultaneously these buttons toggle between beep notification and vibrate notification.
�������
and
�������
Buttons
When pressed simultaneously these buttons activate battery saver mode. The power consumption on the remote
battery drops to zero when the alarm is inactive or disarmed.
➤
Icon descriptions
The vehicle interior temperature icon displays the temperature of the inside of the vehicle when prompted.
The numeric display icon will show the hours and minutes.
The AM/PM icon indicates the time before or after noon.
The alarm clock mode icon indicates that the alarm clock mode is active.
The timer function icon flashes during timed functions including parking timer.
The transmit range indicator icon stays visible as long as the system is within operating range.
The remote transmission indicator icon displays when the transceiver is transmitting a signal.
The vibrate/beep mode icon appears when the remote is set to vibrate mode.
The power saver mode can be turned on or off with the remote. This icon displays the status.