Crest Electronics CRE57005S BASE STATION/SUPER RECEIVER - Manual (Page 5)

Cooling Fan
A cooling fan is recommended for the Base Station/ Super receiver. The cooling fan will help
cool the receiver PC board also with overheat issue. Use a 24 volt fan to cool the receive from
Over Heat. Connect the wires from the fan to the Input power block terminals on the receiver
to power up the fan.
Note the cooling fan for the Base Station sold separately, Item # CRE55499.
Use the double sided stickers to hold the cooling fan on top the receiver.
24 V DC
CRE55499
57005S
CRE55499
COOLING FAN
CRE57005S RECEIVER