Crest Electronics CRE57002SD RECEIVER WITH SOUND - Manual (Page 2)

2.4GHz
On The Transmitter Auxiliary Functions
Press – 1 for à Turn ON / Turn OFF Sound
Press – 2 for à Bell
Press – 3 for à Horn / whistle
Press – 7 for à High Volume
Press – 8 for à Medium Volume
Press – 9 for à Low Volume
Note: To turn On or Off the sound you have to select the latch function on the transmitter
under ‘AUX FUNC SETUP’. To turn On the Latch function, go to ‘AUX FUNC SETUP’ and
press the Stop/Enter button, highlight “F1” and press the Left arrow to select the LATCH
function.
When the locomotive comes to a full stop, the sound will idle for 30 seconds and then stop
working.
CRE 57070 Reed Switch with magnet sold separately
2of 2
Whistle
Reed Switch
White wire
Common
Chuff
1
C
2