COWON D2 - Manual (Page 14)

14
COWON D2+
Basic Operations
6. FM Radio Mode
Checks status of stereo or mono signals
Displays the country for radio signals, which can be changed under Settings mode.
Press it briefly to change the tuning frequency at 0.1MHz intervals. Press it and hold it to searches and
jumps to the next tuning frequency with good signals.
In preset mode, it changes to either previous preset channel or the next preset channel.
Closes the settings screen
Selects the Preset mode. In this mode, only the preset channels can be accessed.
Automatically searches the FM frequencies with good signals and enters them into the preset channels
Sets stereo or mono setting
Displays the preset search mode. You can add the currently tuned frequency to the preset channel or
delete a preset channel.
Sets the quality of the recording radio signals. Higher bps provides better sound quality but requires
larger file size.
Records the currently selected channel
1
2
3
4
5
6
7
10
8
9
1 2
3 3
4
4
5
6
7
8
10
9
- COWON D2+ does not have a dedicated antenna. Instead the headphone wire is used to enhance radio
signal strengths like an antenna. Stretching out the headphone wire will improve signal reception quality.
During Radio recording, be sure to use the headphone to optimize sound quality.
5. Picture and Text Mode
Open images and text files by touching the screen
Images should be placed in PICTURE folder, text files in TEXT folder
Please refer to the list of supported file types for images and texts.
Closes the settings screen
Applies the currently selected image as the background on screen
Displays the image files in the selected folder in slideshow
Moves the cursor up.
Opens the currently selected folder or file
Moves up in a folder level.
Moves the cursor down.
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8 1