Daewoo KOR-816T0A - Manual (Page 5)

7 8
When blinking, the oven is in
AUTOCOOK quantity input
mode.
When blinking, the oven is
operating in MICROWAVE
mode.
When blinking, the oven is
operating in CHILD
SAFETY LOCK mode.
When blinking, the oven is
operating in AUTO COOK.
Function buttons-Used to
select desired oven
operation.
:MICROWAVE,
AUTOCOOK, DEFROST.
More/Less button-Used to
select auto cook time.
(More/Less 10% of auto
cook time)
Clock button-Used to set
and recall the time of day.
When blinking, the oven is
operating in WEIGHT
DEFROST.
When blinking, the oven is
operating in TIME DEFROST.
When blinking, the oven is
operating in weight input mode.
When blinking, the oven is in
MICROWAVE output power
setting mode.
+1 min. button-Used to
increase time of operating.
Stop/clear button-Used to
pause or clear all information
manually put into the oven
control panel except clock.
Start button-Used to start a
selected operation.
When lamp blinks, press the
start button.
Speedy cook button-Used to
set desired time.
(It is incresed 30 seconds.)
Guide lamp-When blinking,
it informs you to be ready to
operate dial knob.
Dial knob-Used to set the
cooking time, weight and
quantity.
CONTROL PANEL
Power Defrost + 1 min.
Auto Cook
1. Beverage
2. Soup
3. Casserole
4. Vegetable
5. Fish Fillets
STOP START
CLEAR Speedy More
Less
Clock
1 2
Stage
Quantyti Weight
Defrost
Time
Lock Auto Cook Watt g
CLOCK
SETTING THE CONTROL
HOW TO SET THE OVEN CONTROLS
Tips: • Be sure to read the cookbook' s introduction before operating the oven.
• Also remember to read this operating instruction for proper safety information and instruction before
using the oven.
• See the cookbook for specific recipes.
• Prior to setting the controls, place one cup of water in the oven, in a heat-proof glass measuring cup,
for testing purposes.
• When setting the controls, everytime a button is pressed, a beep can be heard.
• If you don't take off the food after end cooking, buzzer will sound as 1 minute.
This example is 24 hour clock
system. 1. Press CLOCK button.
If you push the CLOCK
button once again, you can
select 12 hour clock
system.
Then guide lamp will starts
blinking.
2. Turn left the DIAL KNOB for
hour you want.
3. Turn right the DIAL KNOB
for minute you want.
NOTE: This oven is multiple
clock system.
NOTE:
• If you selected 12 hour clock
system, this digital clock allows
you to set from 1:00 to 11:59.
• If you selected 24 hour clock
system, this digital clock allows
you to set from 0:00 to 23:59.
• The colon will stop blinking.
NOTE: If you are not setting current time for 3 seconds, display return to old time.
NOTE: • When the oven is plugged in, “0:00”appears in the display window.
• The two dots between the hour and minute are the clock indicator lights. They will start to flash
on and off.
• The time of day will be displayed at all times, except when the oven is operating.
• In the oven of a power failure or if the oven is unplugged, the clock will have to be reset for the
proper time. Once power is restored or oven is plugged in, the display will show “0:00”.
• To reset the time of day, repeat the steps given below.
• To check the time of day while the oven is operating, press the CLOCK button, then the time will
be displayed for 3 seconds.
• When you turn DIAL KNOB, minutes are increased by to turn right and hours are increased as to
turn left.