Directed Electronics 2500 User Manual

Page 9

FIGURE 2—CONTROL PANEL

volume of the system and affects all
line level outputs to the amplifiers.

FFaaddeerr - To set the master volume/
fader control knob to the fader posi-
tion, pull gently on it until a notched
position is reached. It will then
control the front-to-rear balance of
the front and rear RCA output jacks.

WAARRIINNGG!! DO NOT use excessive force when using this knob

or damage to its release mechanism may result.

2. PPoow

weerr OOnn//OOffff LLEEDD - This LED will

be illuminated when the 2500 is
on.

3. IInnppuutt SSoouurrccee SSw

wiittcchh - The input

source switch selects between
Source 1 and Source 2 inputs.

4 SSuubbw

wooooffeerr VVoolluum

mee CCoonnttrrooll: The

subwoofer volume control knob
controls the volume of the dedi-
cated subwoofer output.

5. SSuubbw

wooooffeerr FFrreeqquueennccyy CCoonnttrrooll - The

subwoofer frequence control knob
controls the low-pass crossover
frequency for the dedicated
subwoofer output between 30-
300Hz at 12dB/octave.

6. FFrreeqquueennccyy CCoonnttrroollss - The frequency

control knobs control the gains for
their respective frequencies. The
center position is flat with a
maximum +18dB and -18dB
adjustment capability.

2 3